Description
Point-to-multipoint WiFi router with a GPON WAN port and (4) Gigabit RJ45 ports.
Featuring a sleek design, the UFiber GPON 300 Mb/s Wireless Gigabit Router from Ubiquiti Networks is designed to deliver high performance routing when connected to a compatible Gigabit Passive Optical Network (GPON) device. This CPE router features an SC/APC type GPON WAN connector with up to 2.4 Gb/s downstream and 1.2 Gb/s upstream speeds, supporting up to 12.4-mile physical GPON links. The convenient LEDs let you know at a glance how strong your optical signal strength is and if you should check the connections. There are also four RJ45 Gigabit Ethernet ports for connecting wired devices in addition to support for 802.11n Wi-Fi, which can wirelessly transfer up to 300 Mb/s with compatible devices. The UFiber GPON can be powered using the included AC adapter or through passive PoE when connected to compatible devices. Wall-mounting screws and anchors are also included.
UNMS Controller Software
|
Status LEDs
The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.
|
 |
 |
Versatile Power
The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC.
|
PRODUCT SPECIFICATIONS
| Mechanical | |
|---|---|
| Dimensions | 140.8 x 141.5 x 31.7 mm (5.5 x 5.6 x 1.3") |
| Weight | 415 g (14.6 oz) |
| Enclosure material | UV-stabilized polycarbonate (PC110U) |
| Hardware | |
| Networking interface | (1) SC/APC, ITU-G.984 GPON WAN port (4) GbE RJ45 LAN ports WiFi 802.11ax 5/2.4 GHz channels |
| Management interface | Ethernet In-Band PON |
| Power method | USB-C 5V DC, 3A 24V passive PoE, 0.5A |
| Power supply | 5V DC, 3A power adapter, 1.5 m cord (included) Passive PoE 2-pair (4, 5+; 7, 8-) |
| Supported voltage range | 10–30V DC (passive PoE) 5V DC (adapter) |
| Max. power consumption | 11W |
| Total non-blocking line rate Downstream Upstream |
2.488 Gbps 1.244 Gbps |
| Normal range of optical module TX RX |
0.5 to 5 dBm -8 to -28 dBm |
| Max. WiFi TX power 2.4 GHz 5 GHz |
20 dBm 20 dBm |
| MIMO 2.4 GHz 5 GHz |
2 x 2 2 x 2 |
| Max. WiFi radio rate 2.4 GHz 5 GHz |
300 Mbps 1.2 Gbps |
| Antenna gain 2.4 GHz 5 GHz |
1 dBi 3 dBi |
| Button | (1) Factory reset |
| Ambient operating temperature | -15 to 45° C (5 to 113° F) |
| Ambient operating humidity | 10 to 90% noncondensing |
| Certifications | FCC, IC, CE |
| NDAA Compliant | Yes |
| LEDs | |
| PON status | (3) signal LEDs All-OFF: bootup 1x orange: signal too low (< -28 db) 1x white: signal low (>= -28 db) 2x white: signal good (>= -25 db) 3x white: signal strong (>= -11 db) 1x orange + 2x white: signal too strong (>= -8 db) 3x orange: no signal LEDs alternate between orange + white + orange and a signal strength indicator: No authority |
| Ethernet | Steady white: link up Blinking white: activity OFF: link down |
| Power | White: ON |
| Software | |
| Mode | ONU/ONT layer 2/3 Ethernet switch |
| Services | Web server, telnet, NAT, bridging and routing, firewall features, and application passthrough features |
| Utilities | Dashboard, monitoring, alarms, and logs |
| Other | Remote reset, remote reboot, remote firmware upgrade, VLAN support |
| Security | GEM Port Encryption |
| Ubiquiti specific features | UISP Mobile App |
| WiFi standards | 802.11 b/g/n/ac/ax |
| Wireless security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3, TKIP/AES) |
| Fiber | |
| Operating wavelength TX RX |
1310 nm 1490 nm |
| Line code | Scrambled NRZ |
| Optical interface nominal bit rate Downstream Upstream |
2488.32 Mbit/s 1244.16 Mbit/s |
| Physical reach | 20 km |
| Supported Data Rates | |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n (WiFi 4) | 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11ac (WiFi 5) | 6.5 Mbps to 866.7 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11ax (WiFi 6) | 8.6 Mbps to 1.2 Gbps (MCS0 - MCS11 NSS1/2, HE 20/40/80) |
