Ubiquiti UF-WiFi-US UFiber Loco GPON Wireless Gigabit Router US Version

7.00 (in)
1.00 (in)
5.00 (in)
Calculated at Checkout


Point-to-multipoint WiFi router with a GPON WAN port and (4) Gigabit RJ45 ports.

Featuring a sleek design, the UFiber GPON 300 Mb/s Wireless Gigabit Router from Ubiquiti Networks is designed to deliver high performance routing when connected to a compatible Gigabit Passive Optical Network (GPON) device. This CPE router features an SC/APC type GPON WAN connector with up to 2.4 Gb/s downstream and 1.2 Gb/s upstream speeds, supporting up to 12.4-mile physical GPON links.

The convenient LEDs let you know at a glance how strong your optical signal strength is and if you should check the connections. There are also four RJ45 Gigabit Ethernet ports for connecting wired devices in addition to support for 802.11n Wi-Fi, which can wirelessly transfer up to 300 Mb/s with compatible devices. The UFiber GPON can be powered using the included AC adapter or through passive PoE when connected to compatible devices. Wall-mounting screws and anchors are also included.

UFiber WIFI is a robust, high‐performance GPON CPE that offers routing, four LAN ports, and Wi‐Fi.

It is powered by 24V passive PoE or a 24V, 0.5A power adapter.

UF-WIFI-US Features

  • Wi-Fi 4 (802.11n)
  • Up to 300 Mb/s Wireless Throughput
  • 4 x Gigabit Ethernet LAN Ports
  • 1 x SC/APC GPON WAN Port
  • Up to 2.4 Gb/s Down / 1.2 Gb/s Up WAN
  • Supports up to 12.4-Mile GPON Links
  • Optical Signal Strength LEDs
  • Powered by PSU or Passive PoE
  • Supports UNMS Controller Software

UNMS Controller Software

The Ubiquiti Network Management System is a comprehensive management controller that features a graphical UI that allows you to quickly configure, manage, monitor, and troubleshoot multiple GPON network sites.
Status LEDs
The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.
Versatile Power
The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC.


Designed for Integration
Up to 128 UFiber WiFi devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the UFiber OLT and third-party OLT devices.
UFiber UF-WiFi Specifications
Dimensions 126.34 x 126.09 x 31.65 mm
(4.97 x 4.96 x 1.25")
Weight 190 g
(6.70 oz)
Networking Interfaces (1) SC/APC, GPON WAN
(4) Gigabit RJ45, Ethernet LAN
(1) Wi-Fi, 802.11n
Networking Interface Speeds
2.4 Gbps Down, 1.2 Gbps Up
10/100/1000 Mbps
300 Mbps
Management Interface In-Band Ethernet PON
Normal Optical Power Range TX (Class B+): 1.5 to 5 dBm RX: -28 to -8 dBm
Power Method DC Jack, 24VDC 24V Passive PoE (Pins 4, 5+; 7, 8-)
Power Supply 100-240VAC / 50-60 Hz Universal AC/DC 24V / 0.5A
Max. Power Consumption 7W
Supported Voltage Range 20 to 28V
Processor Specs MIPS, 900 MHz
Memory Information 256 MB DDR
Button (1) Reset
Operating Temperature -10 to 45° C (14 to 113° F)
Operating Humidity 10 to 90% Noncondensing
Certifications CE, FCC, IC

Extra Information

7.00 (in)
1.00 (in)
5.00 (in)
2.00 LBS