Tycon Systems 18-36VDC IN, 56V 70W 802.3bt PoE OUT. DC to DC Converter and 5G 802.3bt PoE Injector

4.90 (in)
1.50 (in)
3.00 (in)
Calculated at Checkout


18-36VDC IN, 56V 70W 802.3bt PoE OUT. DC to DC Converter and 5G 802.3bt PoE Injector

The Gigabit compatible TP-DCDC-2456GD-BT is 802.3at/bt compatible high power DC to DC converters/PoE inserters designed for operation in industrial environments. The inserter conforms to the new IEEE802.3bt Power Over Ethernet standards for industry compatibility. The PoE inserter supplies 56VDC PoE power on all 8 Ethernet wires (4 Pair). They are backward compatible with 802.3at so they will safely power 802.3at and 802.3af devices in addition to the new 802.3bt devices.

TP-DCDC-2456GD-BT Features

  • Input Voltage 18VDC to 36VDC
  • 8 wire (4 Pair) 56VDC 802.3bt PoE Output
  • High Power Output to 70W
  • Dual DC Inputs for Connecting 2 Power Sources
  • Gigabit Data Throughput
  • Low Voltage Disconnect Feature
  • Short Circuit, Over Current and Reverse/Over Voltage Protection
  • Industrial Temperature Range -40 to 70C


  • 24VDC Remote Power Systems
  • 48VDC or -48VDC Remote Power Systems
  • 802.3bt PoE 4 Pair Powered Cameras and Radio’s
  • 802.3at PoE Powered Devices

The TP-DCDC-2456GD-BT is a low cost option for applications with 18-36VDC available. The input and output are isolated so they work in a negative ground or positive ground system. They have two DC inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for low voltage, surge, short circuit and overload.

TP-DCDC-2456GD-BT Specifications
Input Voltage +/- 18VDC to 36VDC
DC Input Connector Removeable Screw Type Compression Wire Terminal, 5 Pin (12 AWG Max)
POE Specification IEEE802.3bt (4 Pair); backward compatible with 802.3at and 802.3af
Output Voltage (+/-2.5%) 56VDC
Data Throughput

CAT6A or better cable: 10G @ 80M , 5G @ 100M

CAT5E Cable: 5G @ 100M

Data in & Data/POE Output Connector RJ45 (Shielded)
Output Current (max) 1.25A Total
Output Power (max) 70W Total
Self-Consumption Power 2W
Efficiency 80% Min
Low Voltage Protection <16V Turn off Input
Surge Protection 30kV (IEC 61000-4-2,-4,-5)
Line Regulation, Ripple, Noise 1%
Load Regulation 5%
EMC Standards FCC Class B EN55022 Class B
Safety Standards CSA 22.2 &TUV EN60950
Operating Temperature -40 to +70°C (-40 to +158°F)
Operating Humidity (RH) 5% - 90%
Storage Temperature -40 to +85°C (-40 to +185°F)
MTBF (Mean Time Between Failure) 55,489 Hours
Dimensions (LxWxH) 125 x 75 x 38mm (4.9 x 3 x 1.5”)
Weight 255g (9oz)
Warranty 3 years
LED Function

LED#1 Mode A Pins 1,2,3,6

LED#2 Mode B Pins 4,5,7,8

Green = Handshake Valid, PoE On

Red = Pwr On, No Device Detected

Extra Information

Tycon Systems
4.90 (in)
1.50 (in)
3.00 (in)
1.00 LBS