Tycon Systems 11-60VDC IN. 56V 90W 802.3bt PoE OUT. DC to DC Converter and 5G 802.3bt PoE Injector

4.90 (in)
2.60 (in)
4.00 (in)
Calculated at Checkout


11-60VDC IN. 56V 90W 802.3bt PoE OUT. DC to DC Converter and 5G 802.3bt PoE Injector. DIN Rail Mount

The TPDIN-1256GD-BT is a high power DCDC converter and up to 5Gbps PoE injector with a wide voltage input range (11-60VDC), a wide operating temperature range (-40 to +70C) and a high power 802.3bt 90W output.
The unit has dual DC inputs for primary and backup power sources. The input to output is isolated so the unit can accept -48VDC Input, making it compatible with legacy telecom systems. The green DC connector is a locking type that accepts wires up to 12AWG. The “FG” input is used to provide chassis or earth ground.
The device is fan-less and uses natural air flow for cooling. It mounts to a standard DIN Rail commonly used in industrial installations.

TPDIN-1256GD-BT Features

  • 11-60VDC Input, 802.3bt 90W Output
  • Industrial Temperature Range: -40 to +70C
  • Up to 5Gigabit Data Passthru with Surge Protection
  • DIN Rail Mounting


  • 12VDC and 24VDC Remote Power Systems
  • 48VDC or -48VDC Remote Power Systems
  • IEEE802.3bt Industry Standard Device Power from Batteries
TPDIN-1256GD-BT Specifications
Input Voltage 11V to 60VDC, Dual Inputs
Input Current

9.86A @11VDC IN (Full Load)

4.446 @ 24VDC IN (Full Load)

2.26A @ 48VDC IN (Full Load)

Output Voltage IEEE802.3bt 56VDC ; Load Reg = 5%, Line Reg = 1%
Output Current / Max Watts

1.67A / 95W with 34VDC to 60VDC Input

1.43A / 80W with 11VDC to 33VDC Input

Ripple & Noise 1%
Efficiency >90% at 34-60VDC Input ; >86% at 11-33VDC Input
Protections Short Circuit, Reverse Voltage
Over Current Protection 802.3bt Class 8 (96.6W)
Low Voltage Detect (LVD) Device with stop drawing all current when input voltage drops below 8~9VDC
Misc Protections Short Circuit, Reverse Voltage
Data PassThrough 10/100/1000/5000Mbps ; Gigabit
Data Protection

Pin to Pin (1-2, 3-6, 4-5, 7-8)

Clamp Voltage: 3.3V

ESD, IEC61000-4-2: +/- 30KV contact and air

EFT, IEC61000-4-4: 40A (5/50us)

Lightning, IEC61000-4-5: 15A (8/20us)

Connections Removable Wire Terminal
Wire Size 12AWG Max
LED Function

Green Power LED = Input Power is OK

RJ45 Green LED = 802.3bt negotiation and output is OK

Mounting DIN Rail
Operating Temperature -40C to +70C (-40F to 158F)
Humidity (RH) 5% - 90% Non-Condensing
Dimensions (LxWxD) 125 x 66 x 102 mm (4.9” x 2.6” x 4”)
Weight 0.6kg (1.30lb)
Warranty 3 Years

Extra Information

Tycon Systems
4.90 (in)
2.60 (in)
4.00 (in)
1.50 LBS