Ubiquiti UF-LOCO UFiber GPON CPE Gigabit Passive Optical Network Unit

3.01 (in)
1.04 (in)
3.04 (in)
Calculated at Checkout


Point-to-multipoint unit with a GPON WAN port, Gigabit RJ45 port, and Layer 2/3 switching capability.

This UF-Loco UFiber Gigabit Passive Optical Network (GPON) from Ubiquiti Networks lets you share a high-speed Fiber connection with Gigabit-enabled devices. The UF-Loco comes equipped with a single GPON port and a single Gigabit Ethernet port, as well as a digital LED display, making it easy to view the status of the connection.

Additionally, this GPON device supports downstream data rates of up to 2.488 Gb/s and upstream data rates of up to 1.244 Gb/s as well as 1490 nm downstream and 1310 nm upstream wavelengths. Installation is simple, as the PoE-compatible GPON device can be mounted on a wall for easy access.

The sleek UFiber loco is a robust, high‑performance GPON CPE that features extremely low power consumption and the choice of 24V passive PoE or Micro‑USB power.

UF-LOCO Features

  • 1 x GPON WAN Port
  • 1 x Gigabit Ethernet Port
  • 2.488 Gb/s Downstream GPON Speed
  • 1.244 Gb/s Upstream GPON Speed
  • 1490 nm Downstream Wavelength
  • 1310 nm Upstream Wavelength
  • Digital LED Status Indicators
  • 3.5W Max Power Consumption
  • 24V Passive PoE Power Method
  • Wall-Mountable
  • SC/APC Fiber Connector

Status LEDs

The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.

Versatile Power

The UFiber loco can be powered by a Micro-USB Power Adapter (included) or 24V passive PoE.

Designed for Integration

Up to 128 UFiber loco devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber loco integrates with the UFiber OLT, UFiber OLT 4 and third-party OLT devices.

UF-LOCO Specifications
Dimensions 76.5 x 76.5 x 26.4 mm
(3.01 x 3.01 x 1.04")
Weight 77 g (2.72 oz)
Networking Interfaces (1) SC/APC, GPON WAN (1) RJ45, Ethernet LAN
Networking Interface Speeds (1) GPON WAN, ITU G.984,
2.488 Gbps Downstream,
1.244 Gbps Upstream
(1) GbE LAN, 10/100/1000 Mbps
Management Interface In-Band Ethernet PON
Normal Optical Power Range TX (Class B+): 1.5 to 5 dBm RX: -28 to -8 dBm
Power Method Micro-USB: 5V, 1A 24V Passive PoE (Pins +4, 5; -7, 8)
Power Supply Micro-USB Power Adapter*:
5V, 1A
Max. Power Consumption 3.5W
Supported Voltage Range 4.7 to 5.3V
Processor Specs MIPS-32, 240 MHz
Memory Information 128 MB DDR3
Button (1) Reset
Operating Temperature -10 to 45° C (14 to 113° F)
Operating Humidity 10 to 90% Noncondensing
Certifications CE, FCC, IC

Model Comparison

Display -
Power Input 24V passive PoE or Micro-USB Power Adapter 24V passive
Networking Interface GPON (SC/APC), Ethernet (RJ45) GPON (SC/APC), Ethernet (RJ45)
Operation Mode Bridge or Router (router mode is supported in firmware version 2.0 and higher) Bridge or Router (router mode is supported in firmware version 2.0 and higher)
Supported OLTs UFiber OLT, UFiber OLT 4,
list of supported third-party OLTs
UFiber OLT, UFiber OLT 4,
list of supported third-party OLTs

Extra Information

3.01 (in)
1.04 (in)
3.04 (in)
0.50 LBS