U-LTE uses the AT&T LTE network to provide backup Internet connectivity to ensure your UniFi WAN Network is always running. Each defined network can be configured for ability to use LTE failover when it is necessary. Coverage and availability depends on the AT&T LTE network.
Just plug in to any switch port in your corporate network, activate the device by selecting a plan and entering payment information, and enjoy the first 1 GB on us. The promotional plan is $5/month (includes 1 GB), and is $5/GB after the first GB until the end of the May 2021. Starting June 1, 2021, the standard pricing plan is $15/month (includes 1 GB) and is $10 per additional GB.
Speed is dependent on AT&T Network Coverage.
Protect against internet downtime and potentially lost productivity by adding the UniFi U-LTE Redundant WAN over LTE to your network. Featuring an external 2 x 2 MIMO antenna, this category 4 LTE device connects to the AT&T LTE network as a backup if your main internet connection fails. Simply connect it to a UniFi Dream Machine or UniFi Security Gateway (available separately) to integrate it into your network. You can check its status and signal strength, in addition to tracking data usage, with the built-in 1.54" status display. The U-LTE is powered through its PoE-compliant Gigabit Ethernet port, and it has a secondary port for bridging and passive PoE passthrough. Multiple coverage plans are available and you can configure the U-LTE through UniFi Network Controller.
LTE Internet Backup
Flexible Mounting Options
- Operation mode (switching, mirroring, or aggregate) per port
- Network/VLAN configuration
- Jumbo frame and flow control services
- Network settings
- Storm control setting per port
- Spanning tree configuration
- 802.1X control and RADIUS VLAN
- Debug terminal option for command-line interface
Switch Port Status
- Connection speed and duplex mode
- TX/RX data rates
- Network/VLAN setting
|Dimensions||66 x 202.12 x 32.2 mm
(2.60 x 7.96 x 1.27")
|200 g (7.06 oz)
316 g (11.15 oz)
(2) 10/100/1000 RJ45 Ports WP7603 LTE
|Max Power Consumption||8.5W|
(Pairs 1, 2+; 3, 6‐; Pairs 4, 5+; 7, 8‐))
|Power Supply||UniFi PoE Switch|
|Voltage Range||44 to 57VDC|
|LTE Category||Cat 4|
|LTE Antenna||(1) 2x2|
|Operating Frequency||2400 ‐ 2483.5 MHz|
|Operating Temperature||‐10 to 50° C (14 to 122° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Certifications||FCC, IC, PTCRB, AT&T|