Designed for use in both point-to-point or point-to-multipoint configurations, the PrismStation AC Shielded airMAX ac Radio Base with airPrism Technology from Ubiquiti Networks offers improved noise immunity in a modular design that can be scaled to suit nearly any environment. This radio also supports Ubiquiti Networks airPrism technology which offers an improved signal-to-noise ratio, multiple channel connectivity, and co-location operability. The PrismStation AC comes equipped with a single Gigabit Ethernet networking interface as well as an RF connector for GPS connectivity. Furthermore, this radio comes with a Gigabit PoE adapter and can be installed in a variety of locations, thanks to enhanced wind survivability and the ability to withstand temperature extremes.
Improved Noise Immunity
With the focus in one direction, the PrismStation 5AC blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Providing high throughput and an innovative form factor, the PrismStation 5AC is versatile and cost-effective to deploy. The PrismStation 5AC also utilizes enhanced ESD protection to help protect against power surges.
High data rates require a high Signal-to-Noise Ratio (SNR), which is challenging to achieve, especially in noisy, high-density areas. Integrated into Ubiquiti's custom silicon, airPrism technology creates a high SNR by isolating signals within the operating channel and rejecting interference using the specialized circuitry of the High-Selectivity Receiver (HSR).
Depending on the product model and operating mode, available channel widths may include 10, 20, 30, 40, 50, 60, and/or 80 MHz. Theoretically, APs operate on different channels; however, because of the wider channel bandwidths, there can be overlap in spectrum usage. airPrism technology removes up to an additional 30+ dB of adjacent channel interference through the active filtering design, so an airMAX ac AP with airPrism technology can provide significantly greater performance than a typical AP.
Facilitates AP Co-Location
Co-location is vital in many scenarios. For example, a WISP may have limited tower space, so it must co-locate all APs within that allotted footprint. Shielding and other means can lessen interference but may be impractical. By deploying airMAX ac APs with airPrism technology, you can co-locate APs and enhance the overall performance of your wireless network.
Mounting Hardware Only
|155 x 155 x 104 mm
(5.16 x 5.16 x 4.09")
83 x 117 x 69 mm
(3.27 x 4.61 x 2.72")
Mounting Hardware Only
|0.77 kg (1.70 lb)
0.79 kg (1.74 lb)
|Networking Interface||(1) 10/100/1000 Ethernet Port|
|RF Connector||(1) GPS|
|Max. Power Consumption||10W|
|Power Supply||24V, 1A Gigabit PoE Adapter (Included)|
|Power Method||24V Passive PoE (Pairs 4, 5+; 7, 8 Return)|
|Supported Voltage Range||20 to 26VDC|
|Wind Loading||31 N @ 200 km/h
(7 lbf @ 125 mph)
|Wind Survivability||200 km/h
|Operating Temperature||-40 to 70° C (-40 to 158° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Mounting||Pole-Mount (Kit Included)|
|ESD/EMP Protection||± 24kV Contact/Air|
|Certifications||CE, FCC, IC|
|Operating Frequency (MHz)|
|5150 - 5250
5250 - 5350
5470 - 5725
5725 - 5850
|Worldwide||5150 - 5875|
|Management Radio (MHz)|
|US/CA||2412 - 2462|
|Worldwide||2412 - 2472|