ESD protection for outdoor high-speed networks.
The 2nd generation Ubiquiti Networks Ethernet Surge Protector safeguards your outdoor non-PoE and PoE-based systems from voltage threats such as surges and electrostatic discharge events, which can render an entire network system inoperable. This protector is suitable for use with surveillance cameras, access points, and other Ethernet-equipped devices. Ubiquiti Networks has designed it with two surge-protected Ethernet ports that support Gigabit connection speeds. Furthermore, an external housing guards the Ethernet ports along with the surge protector from outdoor elements.
- Protects Outdoor PoE Devices
- ESD and Surge Protection
- Compatible with Gigabit Networks
- Two Ethernet Jacks
ESD Protection for Outdoor High-Speed Networks
The ETH-SP-G2 is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gb/s. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.
Ideal for WISP Networks
For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SP-G2 devices: one near the CPE, and the other at the entry point to the building. Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground.
ESD Protection for Outdoor PoE Devices
Damaging electrostatic discharge attacks and surges are diverted to the ETH-SP and safely discharged into the ground, so network devices are protected.
Additional ESD Protection
All Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP adds another layer of protection to your outdoor, high-speed network.
Plug and Play Installation
Connect the ground and Ethernet cables in between your network devices.
|91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28")
|(2) RJ45 Female Connectors
|Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs
|DC Spark-Over Voltage
|90V @ 100V/s
|Maximum Impulse Spark-Over Voltage
|700V @ 1kV/µs
|Maximum Insulation Resistance
|1G ohm @ 50V
|1.0 pF @ 1 MHz
|Data Line Protection
|RJ45 10/100/1000 Ethernet
|IEEE 802.3af PoE Support
|Shock and Vibration Certification
|-30 to 65° C (-22 to 149° F)
|10 to 90% Noncondensing