The airFiber AF-4X 4 GHz Carrier Backhaul Radio from Ubiquiti Networks is designed for long-range, Point-to-Point (PtP) backhaul links. It features a high TDD throughput and Hybrid Division Duplexing (HDD) technology that helps the device achieve low latency. The airFiber 4X also allows users to customize backhaul links or upgrade existing PtP links.
The airFiber AF-4X operates using the 4 GHz frequency band and features a range of 656,168' / 200,000m. Included with this device is a GPS antenna mount, an external GPS antenna, a metal strap, two cable ties, a 24V/1A airFiber PoE adapter with a mounting bracket, and a power cord.
- Range: up to 124 mi (200 km)
- Up to 500+ Mbps Real Throughput
- Full Band Certification including DFS
- Operates using the 4 GHz Band
- Hybrid Division Duplexing (HDD)
- Low Latency
- Enhanced Spectral Efficiency
- Operation in Unlicensed Bands
- GPS Sync & Clean Power Output
Ubiquiti's INVICTUS silicon and radio architecture are designed specifically for long-distance, outdoor wireless applications. Their INVICTUS core communications processing engine surpasses virtually all of the limitations inherent to generic Wi-Fi chips to help provide superior performance, long-range capability, DFS flexibility, and power output.
Deploy the 4 GHz model that meets your specific spectrum requirements, anywhere around the world. The airFiber X features multiple channel width options to suit your deployment needs.
Operation in Unlicensed Bands
Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations virtually anywhere within the radio band to avoid local interference, and the channel centers are selectable in 1 MHz increments. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements
Low Latency with HDD Technology
The airFiber X is designed to provide the highest TDD throughput and lowest latency available using proprietary Hybrid Division Duplexing (HDD) technology.
With tower space at a premium, the importance of being able to co-locate equipment is becoming an essential attribute for modern wireless networks. The airFiber X is engineered to permit multiple radios to operate side by side, allowing maximum spectral efficiency.
Precise GPS frame synchronization enables co-located airFiber X radios to transmit and receive data without interfering with each other, enabling better frequency reuse and increased network stability.
Clean Power Output
Using advanced digital signal processing, the innovative airFiber X radio design has an ultra -clean transmitter output, reducing broadband noise, facilitating co-location, and enabling higher-order modulations like 256QAM for greater throughput.
|Dimensions||224 x 82 x 48 mm (8.82 x 3.23 x 1.89")|
|Weight||0.35 kg (0.77 lb)|
|RF Connectors||(2) RP-SMA Weatherproof (CHO, CH1)
(1) SMA Weatherproof (GPS)
|Antenna/td>||External, Magnetic Base|
|Power Supply/td>||24V, 1A PoE Gigabit Adapter (Included)|
|Power Method/td>||Passive Power over Ethernet Pins 1, 2, 4, 5 (+) and Pins 7, 8, 3, 6 (-)|
|Max. Power Consumption/td>||12W|
|Supported Voltage Range/td>||19-29VDC|
|Mounting/td>||airFiber X Mount (Rocket Mount Compatible)
GPS Pole Mount (Included)
|Certifications/td>||CE, FCC, IC|
|Operating Temperature/td>||-40 to 55° C (-40 to 131° F)|
|AF-4X Networking Interface|
|Data Port||(1) 10/100/1000 Ethernet Port|
|Management Port||(1) 10/100 Ethernet Port|
|Maximum Throughput||500+ Mbps|
|Maximum Range||200+ km1|
|Frequency||2.4 GHz||3 GHz||4 GHz||5 GHz|
|Throughput||500+ Mbps||500+ Mbps||500+ Mbps||500+ Mbps|
|Range||200+ km||200+ km||200+ km||200+ km|
|Frequency||High-Band 11 GHz||Low-Band 11 GHz|
|Throughput||1.2+ Gbps||1.2+ Gbps|
|Range||300+ km||300+ km|