Tycon Systems RPPL1224-36-35 RemotePro - 35W Solar, 12V 36Ah Battery, 24V PoE Continuous Solar Power System

No reviews yet Write a Review
12.50 (in)
17.50 (in)
6.00 (in)
$40.00 (Fixed Shipping Cost)


The RemotePro® PL series (RPPL) outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof Polycarbonate enclosures hold up to four 12V 8.5AH batteries. The enclosures are hinged and gasket sealed. They can accept a padlock of tamper seal.

The enclosures can be mounted to a wall or pole with the included mounting bracket system.

The high quality solar panels have a 25 year power output guarantee. The 30W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.

Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Most of the RPPL systems include a controller with built in POE inserter and DCDC converter to supply 24V or 48V POE from the 12V or 24V battery system. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

Batteries are an Advance Glass Matt (AGM) type which have good all temperature performance.

Key Features:

  • RemotePro Remote Solar Power System, 35W Solar, 12V 36Ah 432Wh Batt, 8W Continuous Power, 24V 30W Passive PoE out
  • 12V 8A PWM Solar Charge Controller with Load Controlled 24V 30W Passive PoE out + 12V 1.5A Aux out
  • Supports Up to 8W Continuous Power with 6hrs Peak Sun
  • 2-4" Pole/Wall Mount Weatherpoof Lockable UV Resistant Polycarbonate Enclosure and Side of Pole Solar Mount
  • Compact Size for Low Power Applications


  • Complete Remote Power Solution for Off-Grid operation
  • Weatherproof, UV resistant, outdoor enclosures
  • Enclosures can be Wall or Pole Mounted
  • High Performance Valve Regulated Sealed Lead Acid Batteries
  • Advanced battery charge controller protects against overcharge and over discharge


  • Wireless Base Stations and Clients
  • Surveillance Cameras
  • Wireless Bridge and Repeaters
  • Remote Sensors
  • Remote Lighting
  • Backup Power Systems

RPPL1224-36-35 Specification

Rated Power Generation 8W
Reserve Time @ Rated Power 27hrs
POE Output Voltage (DC)



Secondary Volts Out (DC) 12V 1.5A
Battery Capacity (Amp Hrs) 34Ah
Battery Voltage (DC) 12V
Battery Type Valve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM)
Battery Life 5 Years
Controller Type Dual Input: Solar/POE, Dual Output: Battery Voltage/POE with DCDC Converter
Overcharge Protection 14.4V
Over-discharge protection 11.0V
Over-discharge recovery volts 12.5V
Controller Self Consumption < 0.5W
Enclosure Type Polycarbonate
Enclosure External Size 17.5 x 12.5 x 6” (445x318x152mm)
Enclosure Internal Size 14 x 10 x 5” (356x254x127mm)
Solar Panel Dims 26” X 16” (654 x 401mm)
Operating Temperature -30°C to +60°C (-22°F to 140°F)

System Weight

(no batteries)

22lb (10kg)
Battery Weight 22lb (10kg)
Wind Speed Rating 110MPH (49m/s)
Warranty 3 Years


Extra Information

Tycon Systems
12.50 (in)
17.50 (in)
6.00 (in)
52.00 LBS
Solar Power System:
8W Continuous