Tycon Systems 36-72VDC IN. 56V 70W 4 pair Passive PoE OUT. DC to DC Converter and Gigabit Passive PoE Injector

4.90 (in)
1.50 (in)
3.00 (in)
Calculated at Checkout


36-72VDC IN. 56V 70W 4 pair Passive PoE OUT. DC to DC Converter and Gigabit Passive PoE Injector

The TP-DCDC-4856G-VHP is a very high power DC to DC converter / passive POE inserter designed for Ubiquiti airFiber antennas and also various outdoor PTZ security cameras. The DCDC converter supplies 70W passive POE power on all 8 Ethernet wires.

High PoE inserter runs on +48VDC or -48VDC and provides High PoE output with Gigabit PoE power supplied on 4 pairs. 70W Passive PoE Output.

They have two common (-) and two (+) for connecting 2 power sources, such as a primary with a backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated.

TP-DCDC-4856G-VHP Features

  • Remote power or backup power for Ubiquiti airFiber antennas
  • Input Voltage +/- 36-72VDC; Output 56VDC Passive POE
  • Isolated DC input
  • Integrated POE Inserter
  • High Power 70W
  • Short Circuit, Over Current and Over Voltage Protection
  • Industrial Temperature Operation
  • Removable Wire Terminal Input for up to 12AWG wires
  • I.T.E. Power Supply, UL Listed
TP-DCDC-4856G-VHP Specifications
Input Voltage +/- 36VDC to 72VDC
DC Input Connector Removeable Screw Type Compression Wire Terminal (12 AWG Max)
POE Specification Passive ( 8 Wire , 4 Pair ) 1245 V+, 3678 V-
Output Voltage (+/-2.5%) 56VDC
Data in & Data/POE Output Connector RJ45 (Shielded)
Output Current (max) 1.25A Total
Output Power (max)

70W Total

Note: Output power up to 70W at 40C. Derate by 1W for every 1 Deg C above 40C ambient.

Example: 60W at 50C

Self-Consumption Power 2W
Efficiency (min) 85%
Line Regulation, Ripple, Noise 1%
Load Regulation 5%
EMC Standards FCC Class B EN55022 Class B
Safety Standards CSA 22.2 &TUV EN60950
Operating Temperature -40 to +70°C (-40 to +158°F)
Operating Humidity (RH) 5% - 90%
MTBF (Mean Time Between Failure) 55,489 Hours
Storage Temperature -40 to +80°C (-40 to +176°F)
Dimensions (LxWxH) 125 x 75 x 38mm (4.9 x 3 x 1.5”)
Weight 255g (9oz)
Warranty 3 Years

Extra Information

Tycon Systems
4.90 (in)
1.50 (in)
3.00 (in)
1.00 LBS