Tycon Systems 30W Solar, 24V 18Ah Battery, 24V PoE Off Grid Continuous Solar Power System

12.50 (in)
17.50 (in)
6.00 (in)
$40.00 (Fixed Shipping Cost)


RemotePro8W Remote Power System. 36Ah Battery. 30W Solar. 24V PWM Controller with 24V Passive PoE. Polycarbonate Enclosure

The RemotePro PL series (RPPL) outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof Polycarbonate enclosures hold up to four 12V 8.5AH batteries. The enclosures are hinged and gasket sealed. They can accept a padlock of tamper seal.

The enclosures can be mounted to a wall or pole with the included mounting bracket system.

The high quality solar panels have a 25 year power output guarantee. The 30W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.

Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve unregulated sealed lead acid batteries. Most of the RPPL systems include a controller with built in POE inserter and DCDC converter to supply 24V or 48V POE from the 12V or 24V battery system. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

Batteries are an Advance Glass Matt (AGM) type which have good all temperature performance.

RPPL2424-36-30 Features

  • RemotePro Remote Solar Power System, 30W Solar, 24V 18Ah 432Wh Batt, 8W Continuous Power, 24V 30W Passive PoE out
  • 24V 8A PWM Solar Charge Controller with Load Controlled 24V 30W Passive PoE out + 24V 1.5A Aux out
  • Supports Up to 8W Continuous Power with 6hrs Peak Sun
  • 2-4" Pole/Wall Mount Weatherpoof Lockable UV Resistant Polycarbonate Enclosure and Side of Pole Solar Mount
  • Compact Size for Low Power Applications


  • Complete Remote Power Solution for Off-Grid operation
  • Weatherproof, UV resistant, outdoor enclosures
  • Enclosures can be Wall or Pole Mounted
  • High Performance Valve Unregulated Sealed Lead Acid Batteries
  • Advanced battery charge controller protects against overcharge and over discharge


  • Wireless Base Stations and Clients
  • Surveillance Cameras
  • Wireless Bridge and Repeaters
  • Remote Sensors
  • Remote Lighting
  • Backup Power Systems



RPPL2424-36-30 Specifications
Rated Power Generation 8W
Reserve Time @ Rated Power 27hrs
POE Output Voltage (DC) 24V 1.2A
48V .62A
Secondary Volts Out (DC) 24V 1.5A
Battery Capacity (Amp Hrs) 34Ah
Battery Voltage (DC) 24V
Battery Type Valve Unregulated Sealed Lead Acid / Absorbent Glass Mat (AGM)
Battery Life 5 Years
Controller Type Dual Input: Solar/POE, Dual Output: Battery Voltage/POE with DCDC Converter
Overcharge Protection 28.6V
Over-discharge protection 22.0V
Over-discharge recovery volts 24.5V
Controller Self Consumption < 0.5W
Enclosure Type Polycarbonate
Enclosure External Size 17.5 x 12.5 x 6” (445x318x152mm)
Enclosure Internal Size 14 x 10 x 5” (356x254x127mm)
Solar Panel Dims 26” X 16” (654 x 401mm)
Operating Temperature -30°C to +60°C (-22°F to 140°F)
System Weight (no batteries) 22lb (10kg)
Battery Weight 22lb (10kg)
Wind Speed Rating 110MPH (49m/s)
Warranty 3 Years

Extra Information

Tycon Systems
12.50 (in)
17.50 (in)
6.00 (in)
52.00 LBS
Solar Power System:
8W Continuous