Description
7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 9 cores x 1GHz CPU, 1GB RAM, passive cooling case, RouterOS L6
The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched.
Important changes:
No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature.
100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It’s powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
This product is an updated of the popular MikroTik CCR1009-8G-1S-PC.
The unit is equipped with a passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent. It's powered by an external 24V 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.
Product Features
• No Switch-Chip: The device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports.
• Combo-Port: A single 1Gbit software interface that has two hardware interfaces - a SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. Port also allows to switch from one to another interface from software, or in event of disconnect, providing new, unique hardware fail-over feature.
• 100Mbps SFP Support: This is the first MikroTik devices that suppoerts 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
• More Throughput: Due to how ports are connected to CPU, new CCR1009 models can achieve higher theoretical throughput.
CCR1009-7G-1C-PC Specifications | |
---|---|
Product code | CCR1009-7G-1C-PC |
Architecture | TILE |
CPU | TLR4-00980 |
CPU core count | 9 |
CPU nominal frequency | 1 GHz |
Dimensions | 272 x 190 x 44 mm |
RouterOS license | 6 |
Operating System | RouterOS |
Size of RAM | 1 GB |
Storage size | 128 MB |
Storage type | NAND |
MTBF | Approximately 200'000 hours at 25C |
Tested ambient temperature | -20°C to 60°C |
IPsec hardware acceleration | Yes |
Suggested price | $425.00 |
Powering Details | |
---|---|
Number of DC inputs | 2 (DC jack, PoE-IN) |
DC jack input Voltage | 18-57 V |
Max power consumption | 30 W |
Max power consumption without attachments | 25 W |
FAN count | Passive |
PoE in | Passive PoE |
PoE in input Voltage | 18-57 V |
Ethernet Details | |
---|---|
10/100/1000 Ethernet ports | 7 |
Ethernet Combo ports | 1 |
Peripherals Details | |
---|---|
Serial console port | RS232 + Header |
Number of USB ports | 1 |
USB Power Reset | Yes |
USB slot type | microUSB type AB |
Max USB current (A) | 1 |
Other Details | |
---|---|
CPU temperature monitor | Yes |
Current Monitor | Yes |
PCB temperature monitor | Yes |
Voltage Monitor | Yes |
Certifications & Approvals | |
---|---|
Certification | CE, EAC, ROHS |
IP | IP20 |
Included parts
- 24V 2.5A power adapter
- USB OTG cable
- Ears
- IEC cord
- K-37 fastening set