Fanvil PA2 SIP Video Intercom and Paging Gateway

You save $44.00
Calculated at Checkout


Fanvil PA2 SIP PA2 Video intercom & Paging Gateway

Fanvil's PA2 SIP PA2 Video intercom & Paging Gateway has been designed to be a versatile unit meant to fit the needs of many verticals from an office, to a shopping mall, hotel or restaurant, to the small coffee shop around the corner. With compatibility with major SIP protocols and IPPBX platforms, great features and an even better price point, the PA2 is the right fit for anyone looking to implement a paging or intercom solution.

PA2 Features

  • HD Voice
  • Max 30W audio output
  • All in one wall-mounted design
  • Compatible with SIP and major IPPBX/IMS platforms
  • Build-in audio outputs for external speaker and external mic 
  • 2 standard RJ45 ports, one for WAN, another for video camera
  • Supports DC or POE power supply  (802.3af)

The DIY Intercom Solution

The PAZ has a variety of interfaces which enable you to quickly configure your intercom & paging solution to suit the requirements of a wide range of scenarios.

HD video calls

Supports plug and play for SIP HD video calls by HD using the special camera module.

Maximum 30W audio output

With 10W, 20W and 30W audio amplification output modes, the PA2 is able to meet different needs in various situations.

Video linkage

Support Video linkage with HIKVISION and DAHUA IP cameras to make video calls.

High reliability

With 15KV high electrostatic protection and double watch dog design, PA2 can work perfectly in extreme weather conditions and suit industrial applications.

HD intercom & Paging

Supports 7K bandwidth high quality HD voice on two-way intercom and broadcast.

Dual Stream

The PA2 is able to stream high quality video to a NVR device for recording/playback whilst monitoring with bandwidth efficiency on devices, including video IP phones.

Easy Integration

NVR RTSP stream for monitoring within existing systems on your network, outside your phone system.

PA2 Main Spec

  • Compatible with standard SIP protocol and main IPPBX/IMS platform
  • All-in-one wall-mounted design, integrated with network audio codec,
  • digital amplifier
  • Build-in Max 30W power amplifier
  • Online or keypad adjust volume output
  • Build-in audio output to connect external speaker
  • Build-in audio input to connect external MIC
  • Embedded 1 short-in detect port and 1 Short-out control port
  • Optional for 1 or 2 DSS Key
  • 2 Standard RJ45 port, One for WAN port, the other for video Camera

[Note]The audio output power of PA isrelated to the power supply voltage

  • 10W/40:POE/12V DC 1A power supply
  • 20W 140: 18V DC 2A power supply
  • 30W/40 : 24V DC 2A power supply

Extra Information

4.00 LBS