Cambium Networks C058900C801A ePMP 5GHz Force 300-19 SM (FCC) (US cord)

You save $12.01
4.90 (in)
9.90 (in)
4.70 (in)
Calculated at Checkout


Service providers face ever-increasing demand for capacity in a limited amount of spectrum. The Force 300 series of subscriber modules (SM) meets this demand offering high performance and low latency across both point-to-multipoint and point-to-point deployments.

Force 300 SM series offers a wide range of antenna options but they all feature the following differentiating features:

  • Up to 600 Mbps capacity and latencies as low as 2 ms when using ePTP technology.
  • Proven air interface on top of 802.11ac Wave 2 technology
  • Interoperability with the 3000, which uses MU-MIMO to achieve 1.2 Gbps per sector by transmitting to two Force 300 SM’s simultaneously.
  • Interoperability with 3000L, MP 3000 MicroPOP and backward compatibility with the 2000 and 1000.
  • Integrated always-on spectrum analyzer for assessing the noise floor across a wide swath of 5 GHz spectrum.
  • Multiple levels of QoS (Quality of Service) for voice, video and data applications supporting a wide variety of service packages for both residential and enterprise users.
  • Security features meeting the requirements of enterprise, industrial, government and service provider users.
  • Management by Cambium Networks cnMaestro™ element management system for easy provisioning, monitoring and upgrades.
  • Network planning with LINKPlanner and cnHeat.
  • 3-year hardware warranty and support from Cambium Networks.
  • Each SM comes with a Power over Ethernet injector and pole mount hardware included.
ePMP Force 300-19 Specifications
Capacity up to 600 Mbps
Channel Spacing Configurable on 5 MHz increments
Frequency Range Wide Band Operation 4910 - 5970 MHz (Note: Allowable frequencies and bands are dictated by individual country regulations.)
Channel Width 5| 10 | 20 | 40 | 80 MHz
MAC (Media Access Control) Layer Cambium
Physical Layer 802.11ac Wave 2 (2x2 MIMO/OFDM)
Ethernet Interface 10/100/1000 BaseT, Compatible with Cambium PoE & Standard PoE pinouts
Protocols Used IPv4/IPv6 (Dual Stack), UDP, TCP, ICMP, SNMPv2c, NTP, STP, IGMP, SSH
Network Management IPv4/IPv6, HTTPs, SNMPv2c, SSH, Cambium Networks CnMaestro™
VLAN 802.1Q with 802.1p priority
Nominal Receive Sensitivity (w/FEC) @20MHz Channel MCS0 = -89 dBm to MCS8 (256 QAM-3/4) = -66 dBm (per chain)
Nominal Receive Sensitivity (w/FEC) @40MHz Channel MCS0 = -87 dBm to MCS9 (256 QAM-5/6) = -64 dBm (per chain)
Nominal Receive Sensitivity (w/FEC) @80MHz Channel MCS0 = -84 dBm to MCS9 (256 QAM-5/6) = -59 dBm (per chain)
Modulation Levels (Adaptive) MCS0(BPSK) to MCS9 (256 QAM-5/6)
Transmit Power Range 0 to +29 dBm (combined, to regional EIRP limit) (1 dB interval)
Surge Suppression 1 Joule Integrated (C000000L065A - 30V Gigabit surge suppressor is recommended for optimum protection)
Environmental IP55
Temperature 30°C to +60°C (-22°F to +140°F)
Wind Survival 180 km/hour (112 mi/hour)
Weight 1.45 kg (3.2 lb) (includes mounting bracket)
Dimensions (Dia x Depth) 12.4 x 25.1 x 11.9 cm (4.9 x 9.9 x 4.7 in) – with mounting bracket attached
Pole Diameter Range 1 – 1.6 in (2.5 – 4.1 cm) with included clamp; up to 2.25 in (5.7 cm) with larger clamp
Power Consumption 12 Watts
Input Voltage Passive POE 30 VDC Nominal (14-30 VDC Range)
Encryption 128-bit AES (CCMP mode)
FCCID Z8H-89FT0016
Industry Canada Cert 109W-0016
CE EN 301 893 V2.1.1 (5.4 GHz), EN 302 502 V2.1.1 (5.8 GHz)

Extra Information

Cambium Networks
4.90 (in)
9.90 (in)
4.70 (in)
3.20 LBS