null

Ubiquiti Networks ETH-SP-G2 Ethernet Surge Protector

No reviews yet Write a Review
SKU:
ETH-SP-G2
$13.50
UPC:
817882023900
Width:
3.58 (in)
Height:
2.40 (in)
Depth:
1.28 (in)
Shipping:
Calculated at Checkout

Description

The 2nd generation Ubiquiti Networks Ethernet Surge Protector safeguards your outdoor non-PoE and PoE-based systems from voltage threats such as surges and electrostatic discharge events, which can render an entire network system inoperable. This protector is suitable for use with surveillance cameras, access points, and other Ethernet-equipped devices. Ubiquiti Networks has designed it with two surge-protected Ethernet ports that support Gigabit connection speeds. Furthermore, an external housing guards the Ethernet ports along with the surge protector from outdoor elements.

Key Features

  • Protects Outdoor PoE Devices
  • ESD and Surge Protection
  • Compatible with Gigabit Networks
  • Two Ethernet Jacks

ESD Protection for Outdoor High-Speed Networks

Introducing the Ethernet Surge Protector, model ETH-SP-G2, from Ubiquiti Networks. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti airMAX devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network.

The ETH-SP-G2 is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gb/s. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.

Ideal for WISP Networks

All Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP-G2 is essential.

For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SP-G2 devices: one near the CPE, and the other at the entry point to the building. Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground.

Fast Installation

The ETH-SP-G2 is designed for easy, plug and play installation.

ESD Protection for Outdoor PoE Devices

Damaging electrostatic discharge attacks and surges are diverted to the ETH-SP and safely discharged into the ground, so network devices are protected.

Additional ESD Protection

All Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP adds another layer of protection to your outdoor, high-speed network.

Plug and Play Installation

Connect the ground and Ethernet cables in between your network devices.

PRODUCT SPECIFICATIONS

ETH-SP-G2
Dimensions 91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28")
Weight 80 g
Interface Connections (2) RJ45 Female Connectors
ESD/EMP Protection Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs
DC Spark-Over Voltage 90V @ 100V/s
Maximum Impulse Spark-Over Voltage 700V @ 1kV/µs
Discharge Current 10kA+
Maximum Insulation Resistance 1G ohm @ 50V
Maximum Capacitance 1.0 pF @ 1 MHz
Data Line Protection RJ45 10/100/1000 Ethernet
IEEE 802.3af PoE Support Yes
Shock and Vibration Certification ETSI300-019-1.4 Standard
Operating Temperature -30 to 65° C (-22 to 149° F)
Operating Humidity 10 to 90% Noncondensing
 
UPC: 817882023900

 

 

Extra Information

Brand:
Ubiquiti
Width:
3.58 (in)
Height:
2.40 (in)
Depth:
1.28 (in)
Weight:
1.00 LBS